
We supply and install a wide selection of smart EV Chargers in Pollokshields, including tethered and untethered models from Ohme, Hypervolt, Zappi, Zaptec, Tesla, SyncEV, Andersen and Project EV. As most current EVs use Type 2 for home AC charging, there is usually more than one suitable charging point available for a particular vehicle. We can help compare these based on your car, the location of your private parking, whether you prefer a fixed charging lead and the smart functions you want to use.
Chargers are available with app control, automatic charging schedules, compatible overnight tariff integration, solar charging and load management. Pollokshields has many larger and older properties where garages or parking spaces can be some distance from the main electrical supply, so the installation route is an important part of choosing the final charger position. We assess the consumer unit, supply and cable route beforehand and plan the new EV circuit around the way the property and parking area are actually used.

Pollokshields has many large stone-built homes, sandstone villas, converted period properties, flats, townhouses and homes with long driveways or garage areas. These properties often need a more detailed EV charger installation plan, especially where the charger is required away from the main electrical area or where the cable run needs to be discreet and sympathetic to the building.
.png)
A customer in Pollokshields had a large Victorian stone-built home with thick walls and a longer distance between the main house and the garages at the rear of the property. They wanted an EV charger installed on the garage wall so they could charge their vehicles at the top of the driveway, close to where they normally parked. We first assessed the existing mini consumer unit in the garage, but found the existing 4mm armoured cable was not suitable for the EV charger requirements. Instead, we planned a new route from the main electrical area inside the property, concealed the cable behind a wall, then routed it externally for over 20 metres around the lower perimeter of the house. The cable was then terminated into a new dedicated mini EV consumer unit in the garage, and a Zaptec Go charger was installed exactly where the customer wanted it. The finished installation was neat, discreet and in keeping with the property, giving the customer a practical overnight charging setup and reducing their reliance on public charging.
Pollokshields drivers can access public charging around Shields Road, Pollokshaws Road and nearby Southside charging locations, but many customers prefer not to rely on public chargers every week. For larger stone-built homes, driveways or garage parking, a home EV charger gives a more convenient and cost-effective way to charge from the property.
We come across a variety of different situations - but rest assured, we've seen them all, and can decipher from the initial survey what's required, what can be done, and how we can do it.
Pollokshields has many large stone-built homes, sandstone villas, converted period properties, flats, townhouses and homes with long driveways or garage areas. These properties often need a more detailed EV charger installation plan, especially where the charger is required away from the main electrical area or where the cable run needs to be discreet and sympathetic to the building.
Pollokshields properties may have private driveways, shared driveways, long driveway routes, garage parking or allocated parking in converted buildings. We plan the run carefully so the charger is positioned where the customer needs it while keeping the cable run neat and appropriate for the property.
Pollokshields customers often want a charger that works well without looking out of place on a stone-built or period property. Where the charger is fitted on a garage, side wall or driveway area, we consider cable visibility, tethered versus untethered design, smart tariff scheduling and whether the customer wants a more discreet or premium-looking unit. The right charger should suit the building as well as the vehicle.
















Enter some details below, and we'll arrange a free survey and quote for you - we can do this remotely, or by visiting. We’ll confirm the safest, neatest and most practical charger installation route for your property, including options and pricing, on the same day.

Yes. We regularly assess longer cable routes, detached garages and driveway layouts to design safe and compliant EV charger installations.
Yes. Where required, we can install a dedicated mini consumer unit for the EV charger as part of a safe and compliant installation.
Yes. Every Pollokshields enquiry starts with a completely free survey and a clear installation proposal showing the proposed charger location, cable route and finished setup.