We carried out an EV charger installation in Renfrew for a customer who had just taken delivery of a new BYD Seal and wanted a dedicated home charger installed as soon as possible. During the survey, they explained their usual parking arrangement and that the vehicle would be charged at the side of the house. The property’s original front driveway had previously been removed and replaced with a grassed garden area, so the charger position and cable route needed to be planned around how the vehicle was actually parked. After assessing the property layout, parking position and preferred charger location, we planned a practical route from the main consumer unit, which was located within the front porch area of the home. The customer selected a Deta.e eDock2 EV charger, which was positioned on the fence running around the perimeter of the property, close to where the BYD Seal would normally be parked. To achieve a tidy finish, our team routed the 3-core armoured EV cable from the consumer unit and through a carefully drilled exit point in the exterior wall. The cable was then fixed neatly along the fence line and brought through to the required charger position. The Deta.e eDock2 was securely mounted, connected and commissioned, giving the customer a dedicated 7.4kW home charging setup for their new BYD Seal. The completed installation provided a clean and practical solution based around the customer’s actual parking arrangement, allowing the vehicle to be charged conveniently at home rather than relying on public EV chargers around Renfrew.